User Manual

About PHONES
This section explains how to set parameters related to monitoring using headphones. The following diagram
shows the PHONES signal flow.
CUE
M
ONI
MONI
CUE
MONI
C
R
L
C
UE / SOLO
LEVEL
PHONES
LEVEL LINK
PHONES POINT
(MONITOR )
PHONES POINT
(CUE )
PRE DELAY
POST DELAY
PRE DELAY
POST DELAY
PRE DELAY
POST DELAY
PRE DELAY
POST DELAY
PRE DELAY
POST DELAY
PHONES
INSERT
LR+C DOWNMIX
0dB
- 3dB
CENTER CHANNEL ON
- 3dB
0dB
from PLUG - INS
from GEQ / PEQ
to PLUG - INS
to GEQ / PEQ
(INSERT IN )
(INSERT OUT )
(
PHONES POINT (headphone send point)
Monitor signals are typically output from this point. However, if Cue is on, the cue signal will be output.
(
CENTER CHANNEL
If you plan not to monitor the center channel, turn this button off.
(
INSERT (plug-in insert)
You can insert plug-ins into the PHONE signal.
(
PHONES LEVEL (headphone volume level)
Adjusts the output level at the PHONES output jack.
(
PHONES LEVEL LINK (Headphone Level Link function)
You can adjust the level of the signal sent to the PHONE output jack using the MONITOR LEVEL knob.
444
Monitor > About PHONES