User Manual

h
SILK [TEXTURE] knob
Adjusts the TEXTURE parameter of SILK.
i
GC (GAIN COMPENSATION) button
Switches the gain compensation on or off for that channel.
j
HPF indicator
Indicates the high pass filter on/off status for each port.
k
D.GAIN knob
Indicates the digital gain setting. Use the screen encoder to adjust the value.
l
Meter (channel input)
This meter indicates the level after passing through GC (before D.GAIN).
m
Meter (post digital gain)
This meter indicates the level after passing through digital gain.
n
Phase button
Switches the phase of the input signal.
o
GANG button
This is shown only in the case of stereo. If this is on, the difference in the LR analog gain is maintained as the value
changes. The same applies to digital gain.
471
CH Parameter > GAIN/SILK popup window