User Manual

Output channels
This screen contains the following items.
a
HPF ON/OFF button
Switches the HPF on or off.
b
HPF FREQUENCY knob
Indicates the cutoff frequency of the HPF. Use the screen encoder to adjust the value.
c
HPF type select button
Enables you to set the HPF attenuation per octave to −6 dB/oct, −12 dB/oct, −18 dB/oct, or −24 dB/oct.
d
LPF ON/OFF button
Switches the LPF on or off.
e
LPF FREQUENCY knob
Indicates the cutoff frequency of the LPF. Use the screen encoder to adjust the value.
f
LPF type select button
Enables you to set the LPF attenuation per octave to −6 dB/oct, or −12 dB/oct.
g
EQ type select button
Switches the EQ type to PRECISE, AGGRESSIVE, SMOOTH, or LEGACY.
h
A/B switch buttons
Enable you to switch between A and B as the storing destination for the EQ parameters.
485
CH Parameter > EQ popup window (1ch)