User Manual

Touch EQ screen
This screen enables you to adjust EQ parameters by using and sliding your fingers on the touch panel.
Touch operations
This section explains the EQ operations you can make by touching the Touch EQ screen.
Use the multi-band operations to adjust parameters for multiple bands at once.
-Boost band: A band set in the boost area (the region above 0 dB) You can change the boost amount for the
band using the Multi-band function or multi-touch operations.
-Cut band: A band set in the cut area (the region below 0 dB) You can change the cut amount for the band
using the Multi-band function or a multi-touch operations.
1
2
3
4
5
4
Single finger control
a
Peak of the selected band
Use your finger to drag the peak of the band to adjust the band frequency or gain.
Double-tap the solid circle to reset the gain.
If the solid circles for multiple bands are overlapping, the selection will change when you tap.
b
G axis
Drag to lock the frequency value and adjust the gain.
c
F axis
Drag to lock the gain value and adjust the frequency.
d
HPF/LPF
Drag to adjust the frequency. Double-tap to turn on/off.
488
CH Parameter > Touch EQ screen