User Manual

m
KEY IN FILTER field (This area will not appear if DE-ESSER is selected.)
Enables you to make various settings for a filter that lets the key-in signal pass.
(
Filter select buttons
Select the type of filter from HPF, BPF, or LPF. To disable the filter, press the button that is turned on.
(
Q knob
Indicates the filter Q setting. Use the screen encoder to adjust the value.
(
FREQUENCY knob
Indicates the cutoff frequency of the filter. Use the screen encoder to adjust the value.
n
KEY IN CUE button
This button cue-monitors the signal that is selected as the KEY IN SOURCE. CUE will be defeated if you select a
dynamics processor for which this button is not displayed, or if you move to a different screen.
NOTE
Even if the Cue mode is set to MIX CUE (the mode in which all channels whose [CUE] key is on are mixed for monitoring),
turning on the KEY IN CUE button will cause only the signal of the corresponding channel to be monitored. All [CUE] keys that
had been turned on at that time will be forcibly defeated.
498
CH Parameter > DYNAMICS 1/2 popup window (1CH)