User Manual

DYNAMICS 1/2 popup window (CH 1-72, CH 73-144, MIX,
MTRX/ST)
This window enables you to make settings of the global dynamics parameters for the corresponding channel.
3
1
2
a
Channel select buttons
Enable you to select the channel that you want to operate. The current channel icon, number, threshold, and color
appear on the button.
b
Dynamics parameter
Displays the type of dynamics processor, meters that indicate the levels of signals after dynamics processing, the GR
meter, and the threshold (a numeric value). Press the area to access the DYNAMICS 1ch window of that channel. If
LEGACY COMP, COMP260, DE-ESSER, EXPANDER, or DUCKING has been selected as the dynamics processor type, the
abbreviated name of the type appears near the top of this area.
Each abbreviated name means as follows:
LC: LEGACY COMP
C2: COMP260
GT: GATE
DS: DE-ESSER
EX: EXPANDER
DK: DUCKING
If the dynamics processor is any type other than GATE, the threshold setting is indicated as a horizontal line
in the meter area.
Type = Any type other than GATE
500
CH Parameter > DYNAMICS 1/2 popup window (CH 1-72, CH 73-144, MIX, MTRX/ST)