User Manual
About insert
Each channel provides two inserts: Insert 1 and Insert 2. In each insert, you can insert up to four plug-ins,
GEQ/PEQ, or external devices (via the I/O jacks). Each insert point can be selected independently for INSERT
1 and INSERT 2. For details on inserting plug-ins, refer to “Using plug-ins”(p.644). For details on inserting
GEQ/PEQ, refer to “Inserting a GEQ/PEQ into a channel” on page 247.
Inserting an external device (OUTBOARD) into a channel
An external device such as an effect processor can be inserted into the signal route of each channel. There
are three ways to control the external device.
(
“Using the Selected Channel section to make INSERT settings (only for CS-R10, CS-R10-S, CSD-R7)”(p.503)
(
“Using the OVERVIEW screen to make INSERT settings”(p.506)
(
“Using the SELECTED CHANNEL VIEW screen to make INSERT settings”(p.507)
502
CH Parameter > About insert