User Manual

Using the Selected Channel section to make INSERT
settings (only for CS-R10, CS-R10-S, CSD-R7)
1 Select the channel that you want to operate.
2 Press the INSERT [PLUG-INS] key.
The INSERT screen appears.
3 Use the INSERT 1/2 switch button and INSERT [A]–[D] buttons to select an insert
channel and block for which you want to assign the external device.
4 Press the MOUNT popup button to access the MOUNT popup window.
503
CH Parameter > Using the Selected Channel section to make INSERT settings (only for CS-R10, CS-R10-S,
CSD-R7)