User Manual

5 Press the OUTBOARD tab and select OUTBOARD.
6 Press the OK button.
The OUTBOARD screen appears.
7 Press the INSERT OUT patch select popup button to access the OUTPUT PATCH
popup window.
8 Specify the output port that you want to use as the insert out.
9 Press the INSERT IN patch select popup button to access the INPUT PATCH popup
window.
10 Specify the input port that you want to use as the insert in.
11 If necessary, make insert settings for other channels in the same way.
504
CH Parameter > Using the Selected Channel section to make INSERT settings (only for CS-R10, CS-R10-S,
CSD-R7)