User Manual

Using the OVERVIEW screen to make INSERT settings
1 Press the [VIEW] key to access the OVERVIEW screen.
INSERT/DIRECT
OUT field
OVERVIEW screen
2 Press the INSERT/DIRECT OUT field for the channel into which you want to insert.
The INSERT/D.OUT popup window appears There are two types of INSERT/D.OUT popup
window: 1CH, and 12CH INSERT 1/2.
3 Press the INSERT block button to which you want to assign the external device: The
MOUNT screen appears.
4 Follow steps 5–11 under “Using the Selected Channel section to make INSERT
settings.”
506
CH Parameter > Using the OVERVIEW screen to make INSERT settings