User Manual

Directly outputting an input channel
The signal of an input channel can be directly output from the OUTPUT jack of an I/O rack, any desired OMNI
OUT jack, or an output channel of a desired card slot.
1 In the OVERVIEW screen of the input channel that you want to directly output,
press the INSERT/DIRECT OUT field, or press the DIRECT OUT field in the SELECTED
CHANNEL VIEW screen.
INSERT/DIRECT OUT field in
the OVERVIEW screen
DIRECT OUT field in the
SELECTED CHANNEL VIEW
screen
The “INSERT/D.OUT popup window (1CH)”(p.510)appears There are two types of INSERT/
D.OUT popup window: 1CH and 12CH D. OUT.
2 Press the DIRECT OUT PATCH popup button to access the DIRECT OUT PATCH popup
window.
3 In the DIRECT OUT PATCH popup window, select the output port that you want to
use for Direct Out, and then press the CLOSE button.
You will return to the INSERT/D.OUT popup window.
4 Use the DIRECT OUT point to switch the point from which the Direct Out signal is
taken.
5 Use the DIRECT OUT LEVEL knob to adjust the output level of the Direct Out.
514
CH Parameter > Directly outputting an input channel