User Manual

g
DIRECT OUT ASSIGN (assign)
Indicates the number of channels assigned to each port.
h
Grid
This grid enables you to patch input channels (vertical columns) to output ports (horizontal lines). Currently-patched
grids are indicated by white squares. Press or click a desired grid to set or disable the patch.
i
Continuous Patch
button
Press the continuous patch
button, and then rotate the select knob (b) (j) to patch the intersecting channels
continuously. If you press the continuous patch
button, the button and the button will appear. Press
the
button again to confirm the selected continuous patches. Press the button to revert the continuous
patches to their previous state.
j
Port select knob
Selects the port that will be used for Direct Out.
k
CLEAR ALL button
Press this button to clear all patches.
520
CH Parameter > DIRECT OUT page