User Manual

About delay
Each input/output channel features a channel delay of up to 1000 msec. You can select the delay time unit
from the following: meter, feet, sample, msec, frame, depending on your application. You can also specify
insert points for the delay on each channel individually.
There are three ways to set the delay:
(
“Controlling the delay via the Selected Channel section(CS-R10, CSR10- S, CSD-R7) ”(p.523)
(
“Controlling the delay via the OVERVIEW screen”(p.524)
(
“Controlling the delay via the SELECTED CHANNEL VIEW screen”(p.525)
521
CH Parameter > About delay