User Manual

Controlling the delay via the SELECTED CHANNEL VIEW
screen
1 Press the [VIEW] key to access the SELECTED CHANNEL VIEW screen.
DELAY field SELECTED CHANNEL VIEW screen
2 Select the channel that you want to operate.
3 Use the corresponding screen encoder or the [TOUCH AND TURN] knob to adjust the
delay parameters.
4 Set the insert point if necessary.
Use the “DELAY popup window (12ch)”(p.526) to set the insert point.
NOTE
For information on monitor/cue delay, refer to “MONITOR SETTINGS popup window”(p.393).
525
CH Parameter > Controlling the delay via the SELECTED CHANNEL VIEW screen