User Manual

DELAY popup window (12ch)
6
2
3
4
5
1
8
7
This screen contains the following items.
a
DELAY SCALE popup button
Press this button to access the “DELAY SCALE popup window”(p.529) in which you can select the unit for the delay
time.
b
Channel select buttons
Each button will light to indicate that the corresponding channel is selected. Press the button to select the channel.
c
DELAY ON buttons
Switch delay on or off.
d
Delay insert point select buttons
Enable you to select the delay insert point from the following: PRE HPF, PRE EQ, PRE DYN1, PRE DYN2, PRE FADER,
POST FADER.
e
Delay setting knobs
Indicate the channel delay value. Use the corresponding screen encoder or the [TOUCH AND TURN] knob to adjust
the parameters. You can view the current value immediately above the knob (always shown in unit of ms) and below
the knob (shown using the currently-selected scale). Press the knob to display a popup window, in which you can set
the delay time.
NOTE
If msec (millisecond) has been selected for the DELAY SCALE, nothing will appear above the knob.
526
CH Parameter > DELAY popup window (12ch)