User Manual

f
SEND ON button
Switches send on/off for each send-source channel.
g
FOLLOW setting buttons
Enable you to set parameters for signals routed from input channels to the MIX/MATRIX bus so that the parameters
will follow the FADER/ON/DCA settings.
h
SEND PAN/BALANCE knob
Adjusts the pan or balance when the send-destination bus is stereo. If the send destination is monaural or is set to
FIXED, this knob does not appear. If the send source is monaural, the knob adjusts pan. If the send source is stereo,
the knob adjusts balance.
i
SEND LEVEL knob
Indicates the send level to the selected send destination. You can press this and then use the screen encoder or the
[TOUCH AND TURN] knob to adjust it. If the send destination is set to FIXED, this knob will not appear.
538
CH Parameter > SENDS TO popup window