User Manual

SENDS/USER DEFINED KNOB popup window
4 5 6
2
1
3
7
This screen contains the following items.
a
SENDS/USER DEFINED KNOBS selection buttons
When making SENDS settings or USER DEFINED knob settings, this switches between the two.
b
Selected channel
This area shows the number, name, icon, and channel color of the channel that is currently selected for operation.
Press the left side of the selected channel area to select the preceding channel. Press the right side of the area to
select the next channel.
c
PAN/LEVEL selection button
When the selected send-destination bus is stereo, the display will change to pan or send level.
d
MIX/MATRIX overview
This indicates the level of the signal sent from the channel to the MIX/MATRIX bus. The areas currently displayed in
detail are displayed in white boxes. The areas can be changed by tapping or sliding.
e
Send-destination bus selection buttons
Press these buttons to select the send-destination MIX/MATRIX bus.
546
CH Parameter > SENDS/USER DEFINED KNOB popup window