User Manual

Using the Quick data copy function
This copies parameters from the desired channel to multiple channels. This is useful for getting ready
efficiently. The parameters that can be copied include send level, send on/off, pan/balance, send point, EQ
and dynamics type, and FOLLOW settings.
(
Send level
This copies the send level from a desired input channel to the send levels going to multiple MIX or MATRIX
buses from multiple input channels.
(
Send on/off
This copies the send on/off setting from a desired input channel to the send on/off going to multiple MIX or
MATRIX buses from multiple input channels.
(
Pan/balance
This copies the pan/balance from a desired input channel to the pan/balance of multiple MIX or MATRIX
buses from multiple input channels.
(
Send Point
This copies the send on/off setting from a desired input channel to send points going to multiple MIX or
MATRIX buses from multiple input channels.
(
EQ or dynamics type
This copies the EQ or dynamics type from a desired input channel to multiple input channels. You can also
copy the EQ and dynamics type for the MIX or MATRIX bus to multiple MIX or MATRIX buses.
(
FOLLOW settings
This lets you copy settings that follow the FADER/ON/DCA from a desired input channel, for signals sent to
the MIX/MATRIX bus or the parameters of signals outputted directly.
548
CH Parameter > Using the Quick data copy function