User Manual

Operating the Quick Data Copy function from the
OVERVIEW screen or SENDS TO/SENDS FROM popup
windows
The controls and corresponding parameters are shown below.
Screen/window Control Parameter
OVERVIEW screen
SEND knob Send level*
SEND ON/OFF button Send on/off
SENDS TO popup window
SEND LEVEL knob Send level*
SEND PAN/BALANCE knob Pan/balance
SEND ON button Send on/off
PRE button Send Point
SENDS FROM popup window
SEND LEVEL knob Send level*
SEND PAN/BALANCE knob Pan/balance
SEND ON button Send on/off
PRE button Send Point
SENDS TO popup window
SENDS FROM popup window
FOLLOW setting buttons Settings to follow the FADER/ON/DCA
*Overlay offset values will not be copied.
1 On the OVERVIEW screen, hold down the [SHIFT] key and press the SEND LEVEL
knob or the SEND ON/OFF button.
The “PARAMETER COPY popup window”(p.550)appears.
2 Select the copy destination and press the EXECUTE button.
The parameters will be copied to the selected channel numbers. To cancel the copy operation,
press the CANCEL button instead of EXECUTE.
549
CH Parameter > Operating the Quick Data Copy function from the OVERVIEW screen or SENDS TO/SENDS
FROM popup windows