User Manual

Operating the Quick Data Copy function from the HPF/
EQ and DYNAMICS 1/2 popup windows
The controls and corresponding parameters are shown below.
Screen/window Control Parameter
HPF/EQ popup window EQ type select button EQ type
DYNAMICS 1/2 popup window Dynamics processor type button Dynamics processor type
INSERT/D.OUT popup window (12CH/
D.OUT)
FOLLOW setting buttons Settings to follow the FADER/ON/DCA
1 On the HFP/EQ popup window, press the EQ type switch button while holding the
[SHIFT] key.
The “PARAMETER SET popup window”(p.552) appears.
2 Select the copy destination and press the EXECUTE button.
The parameters will be copied to the selected channel numbers. To cancel the copy operation,
press the CANCEL button instead of EXECUTE.
551
CH Parameter > Operating the Quick Data Copy function from the HPF/EQ and DYNAMICS 1/2 popup
windows