User Manual

About DCA
The RIVAGE PM series features 24 DCAs that enable you to control the level of multiple channels
simultaneously. It includes the following features:
(
DCA1–24 can be used for all input channels and all output channels.
(
Both input channels and output channels can be assigned to the same group at the same time.
(
All channels assigned to a DCA can be cued simultaneously.
(
You can monitor the corresponding DCA at unity gain (which is equivalent to the level obtained when the
DCA fader is set to 0 dB).
(
All channels assigned to a DCA can be temporarily recalled (rolled out) on the panel and controlled
individually (DCA ROLL-OUT).
There are two ways to assign a channel to a DCA.
(
You can select a specific DCA first and then specify the channels to be assigned to the group, or
(
You can select specific channel and then specify a DCA to which it should be assigned.
NOTE
DCA settings are saved as part of the scene.
568
Channel Job > About DCA