User Manual

Assigning channels to a DCA (Selecting the channels that
will belong to a specific DCA)
1 Press the CH JOB button on the menu bar, and then select DCA GROUP ASSIGN.
When you select DCA GROUP ASSIGN, the DCA/MUTE ASSIGN window (ALL DCA) appears.
2 Use the DCA select buttons to select the DCA to which you want to assign channels.
3 Press the DCA assign popup field.
The “DCA GROUP ASSIGN window (ALL DCA)”(p.575) appears.
4 In the DCA GROUP ASSIGN window, select the channels that will be assigned to a
DCA (multiple selections are allowed).
5 Assign channels to other DCAs in the same way.
NOTE
You can assign a single channel to more than one DCA. In this case, the value will be the sum of the levels of all assigned
DCA faders.
6 When you finish assigning the channels, press the CLOSE button to close the popup
window.
The DCA/MUTE ASSIGN field of the OVERVIEW screen indicates the DCA(s) to which each
channel is assigned. Indicators that are lit yellow in the upper and middle row of this field
indicate the DCAs to which the corresponding channel belongs.
569
Channel Job > Assigning channels to a DCA (Selecting the channels that will belong to a specific DCA)