User Manual

DCA ROLL-OUT
All channels assigned to a DCA can be temporarily recalled (rolled out) to other bays and controlled
individually.
You can use the Preferences settings to change how the channels will rolled out.
DCA ROLL-OUT operation
1 Press the [DCA] key on the top panel to select the DCA layer.
2 Press the [SEL] key for the DCA you want to roll out.
The corresponding channels will be rolled out on the panel according to the DCA ROLL-OUT
setting in PREFERENCES.
3 To exit from ROLL-OUT mode, select a different bank, or press the [SEL] key again
for the same DCA.
NOTE
(
You cannot turn Roll-out mode on while operating a DCA (for example, while assigning channels or editing the group
name).
(
If the number of channels assigned to a DCA exceeds the number of faders in the block (that is a roll-out target), you will
be unable to control extra channels.
(
If the number of channels assigned to a DCA exceeds the number of faders on a particular bay for roll-out, you will be
able to scroll extra channels to the left or right inside the block using the channel strip encoder or screen encoder (only
on bay L or C). While you are turning the knob, a message “DCA ROLLOUT: DCA members scrolling” will appear on the
bottom of the touch screen or external monitor screen.
Rolling-out channels using the DCA Roll-out function
You can use the Preferences settings to change how the channels will rolled out.
The SEL LINK and No. OF BAYS TO USE settings will determine which bay will be used for the roll-out.
(
If you use the DCA ROLL-OUT function on a bay that is not linked in the SEL LINK section, channels will be
rolled out only on that bay.
(
If you use the DCA ROLL-OUT function on a bay that is linked to another bay in the SEL LINK section,
channels will be rolled out on that bay and its linked bay. The No. OF BAYS TO USE parameter in the
PREFERENCES settings will determine the number of bays on which to roll out the channels.
NOTE
You cannot use the DCA ROLL-OUT function on multiple bays simultaneously. If you try to do so, the message “Only one DCA can be
rolled out at one time” will appear near the bottom of the touch screen or external monitor screen.
574
Channel Job > DCA ROLL-OUT