User Manual

MUTE GROUP ASSIGN window (ALL MUTE)
9
6
2
3
4
5
7
1
8
a
MUTE group and MUTE SAFE buttons
Enable you to select a mute group or Mute Safe to which you want to assign channels.
b
NAME EDIT button
Press this button to access a keyboard window, in which you can enter the mute group name.
c
Mute group assign field
This area displays the channels assigned to the currently-selected mute group.
While this window is displayed, press the [SEL] key for the channel that you want to assign to the mute group. The
channel will be assigned to the mute group, and the on-screen fader for that channel will turn red. Press the same
[SEL] key once again if you want to remove the channel from the group.
If you select the MUTE SAFE button, this field will display the channels that are in Mute Safe status (that is, excluded
from the mute groups). The procedure for enabling or cancelling Mute Safe for channels is the same as when
assigning or removing channels to or from a mute group.
d
MUTE GROUP MASTER button
Switches mute on or off for the corresponding mute group.
The [ON] key for each muted channel in a mute group will flash.
e
DIMMER LEVEL knob
Sets the dimmer level for the corresponding mute group when the Dimmer function is enabled.
NOTE
If the dimmer level is set to any level other than –∞ dB, and the corresponding MUTE GROUP MASTER button is turned on, this
button will light orange.
583
Channel Job > MUTE GROUP ASSIGN window (ALL MUTE)