User Manual

Channel link
Channel link is a function that links the operations (such as fader movements or EQ parameters) of input
channels or output channels. Two or more channels that are linked are called a link group. You can create up
to 52 link groups for input channels and up to 52 link groups for output channels. The type of parameters to
be linked can be individually selected for each link group. However, input channels and output channels
cannot coexist in a single link group. While pairing is limited to use on two adjacent channels, the channel
link function allows multiple channels to be joined. If you want to link channels provisionally, you can use
temporarily link.
1 Press the CH JOB button on the menu bar, and then select CH LINK.
When you select CH LINK, the CH LINK MODE popup window will appear.
2 Press an INPUT/OUTPUT button to select the channels that you want to link.
3 Link channels by holding down the the [SEL] key of the link-source channel and
pressing the [SEL] key of the link-destination.
4 Using the buttons of the LINK PARAMETER field in the CH LINK MODE screen, select
the parameters that you want to link.
5 If a MIX ON, MIX SEND, MATRIX ON, or MATRIX SEND button was turned on in step 4,
use the buttons of the SEND PARAMETER field to specify the applicable buses.
6 To close the CH LINK MODE popup window, press the CLOSE button.
586
Channel Job > Channel link