User Manual

Configuring a temporary channel link
Press and hold down the [SHIFT] key and press the [SEL] key. Alternatively, press and hold down the [SHIFT]
key and press the channel name area located at the bottom of the OVERVIEW screen. The [SEL] keys for the
specified channels will flash. The meter area, and the channel name areas in the OVERVIEW screen will be
marked by a yellow frame and a link icon.
If you press any [SEL] key, the temporary link will be canceled. Also, if you turn off the power to the unit or
load a file, the temporary link will be canceled. In general, scene recall will not cancel the temporary link.
However, if the channel pair setting is changed due to a scene recall, the temporary link will be canceled.
590
Channel Job > Configuring a temporary channel link