User Manual

Copying channel parameters
You can copy channel mix parameter settings to other channels. When the copy operation is executed, the
parameter settings will overwrite those of the copy destination.
You can copy parameter settings between the following channel combinations.
(
Between input channels
(
Between MIX channels
(
Between MATRIX channels
(
Between Stereo A and B
NOTE
Analog HA, patch, channel name, and phantom settings will not be copied.
1 Press the CH JOB button on the menu bar, and then select CH COPY.
When you select CH COPY, the CH COPY popup windowwill appear.
When you select CH COPY, the CH COPY popup window will appear.
2 Select the copy source channel.
Once you select the copy source channel, the system automatically engages a mode that
enables you to select the copy destination. The fader graphics for the copy source channel will
be highlighted in green.
3 Select the copy destination channel(s) (multiple selections are allowed).
The fader graphics for the copy destination channel(s) will be highlighted in pink.
4 To execute the copy operation, press the PASTE button.
The copy operation will be executed, and the parameter settings will overwrite those of the
copy destination(s).
591
Channel Job > Copying channel parameters