User Manual

Moving channel parameters
You can move the settings of a specific input channel to a different input channel. When you execute a move,
the channels between the move-source and move-destination are renumbered forward or backward.
NOTE
The channel insert assignment (INSERT OUT (1C)) settings of the SYSTEM CONFIG [DSP] popup window will not move.
1 Press the CH JOB button on the menu bar, and then select CH MOVE.
When you select CH MOVE, the “CH MOVE popup window”(p.599) will appear.
2 Select the move-destination channel(s) (multiple selections are allowed).
The fader graphics for the move-source channel will be highlighted in green.
3 Press the TO button, and then select the move-destination channel.
The fader graphics for the move-destination channel(s) will be highlighted in pink.
4 To execute the move operation, press the MOVE button.
A dialog box will ask you to confirm the operation.
597
Channel Job > Moving channel parameters