User Manual

Initializing channel parameters
You can restore the parameters of a channel to an initialized state. This operation can be performed on any
channel(s).
NOTE
Analog HA, channel name, patch, and Recall Safe settings will not be initialized.
1 Press the CH JOB button on the menu bar, and then select CH DEFAULT.
When you select CH DEFAULT, the CH DEFAULT popup window will appear.
When you select CH DEFAULT, the “CH DEFAULT popup window”(p.601) will appear.
2 Select the channel(s) that you want to initialize (multiple selections are allowed).
The corresponding channel will be highlighted.
3 To execute the initialization, press the DEFAULT button.
A dialog box will ask you to confirm the Initialization operation.
4 Press the OK button in the confirmation dialog box.
The parameters of the selected channel(s) will be initialized.
5 To close the CH DEFAULT popup window, press the CLOSE button.
600
Channel Job > Initializing channel parameters