User Manual

Copy source Copy destination
AutoMixer
Open channels will be assigned (parameters will not be
copied)
OutBoard Copy destination is changed to OutBoard (no patching)
Effect
When the copy source is a Dual type, copy and patch
(including the parameters and bypass). When the copy
source is a Normal type
*1
, copy and patch the L side
(including the parameters and bypass).
BLANK
Clear the copy destination insert module patch (leave the
DSP allocation used by the copy destination)
*1: Except for Dual type and Stereo type
Copy source is stereo (pair), copy destination in stereo (pair)
Copy source Copy destination
31BandGEQ
Copy source will be copied and patched (On, Band/Gain,
Limit)
*1
Flex15GEQ
Copy source will be copied and patched (On, Band/Gain,
Limit)
*1
8BandPEQ
Copy source will be copied and patched (On, Type, Band/
Gain, Band/Q, Band/Bypass, Band/Freq., Low Shel., High
Shel.)
*1
AutoMixer
Two open channels will be assigned (parameters will not be
copied)
OutBoard Copy destination is changed to OutBoard (no patching)
Effect
When the copy source is a Stereo type, copy and patch
(including the parameters and bypass). When the copy
source is a Normal type
*2
, copy and patch the L side
(including the parameters and bypass).
BLANK
Clear the copy destination insert module patch (leave the
DSP allocation used by the copy destination)
*1: The GEQ link settings for the copy destination will not be changed.
*2: Except for Dual type and Stereo type
Copy source is a stereo (pair) channel, and copy destination is a mono channel
Copy source Copy destination
31BandGEQ
31-band GEQ of copy source (L side) will be copied and
patched (On, Band/Gain, Limit)
Flex15GEQ
Copy source of A side will be copied and patched (On, Band/
Gain, Limit)
8BandPEQ
Copy source of A side will be copied and patched (On, Type,
Band/Gain, Band/Q, Band/Bypass, Band/Freq., Low Shel.,
High Shel.)
AutoMixer
One open channel will be assigned (parameters will not be
copied)
OutBoard Copy destination is changed to OutBoard (no patching)
603
Channel Job > Parameters to be copied