User Manual

Inserting a GEQ/PEQ into a channel via the Selected
Channel section
This section explains how to insert a GEQ/PEQ into the selected channel for use.
1 2
a
INSERT [PLUG-INS] key
Enables you to recall a parameter setting screen for the inserted plug-in.
b
INSERT 1/2 [ON] keys
Switch INSERT1 and INSERT2 on or off respectively.
1 Select the channel that you want to operate.
2 Press the INSERT [PLUG-INS] key.
The“INSERT screen”(p.613) appears.
3 Use the INSERT 1/2 switch buttons and INSERT [A]–[D] buttons to select an insert
channel and block for which you want to assign the GEQ/PEQ.
611
GEQ/PEQ/Automixer > Inserting a GEQ/PEQ into a channel via the Selected Channel section