User Manual

Using the 31BandGEQ
1 Follow steps 1–8 under Inserting a GEQ/PEQ into a channel via the Selected
Channel section, insert the 31BandGEQ into a channel.
The system displays the “GEQ/PEQ EDIT screen”(p.621) that you inserted.
2 If you are using a stereo source, link two GEQ units.
When you press the GEQ LINK button, the following popup window will appear. To enable
linking, press any button other than CANCEL. The popup window contains the following items.
GEQ*A->GEQ*B button
The channel L parameter values will be copied to channel R, and then those parameters will
be linked. An asterisk (*) represents the GEQ location.
GEQ*B->GEQ*A button
The channel R parameter values will be copied to channel L, and then those parameters will
be linked. An asterisk (*) represents the GEQ location.
CANCEL button
Cancels the link and closes the popup window.
3 Press the GEQ ON/OFF button to turn the 31BandGEQ on.
619
GEQ/PEQ/Automixer > Using the 31BandGEQ