User Manual

Using the Flex15GEQ
You can use faders 1–12 and [ON] keys in the Channel Strip section to control the Flex15GEQ.
1 Follow steps 1–8 under Inserting a GEQ/PEQ into a channel via the Selected
Channel section, insert the Flex15GEQ into a channel.
The system displays the EDIT screen for the GEQ/PEQ that you inserted.
This window is the same as that for the 31BandGEQ, except that the AVAILABLE BANDS field is
a real-time indication of the number of additional bands (maximum 15) that can be controlled
for the current GEQ.
2 Press the GEQ ON/OFF button to turn the Flex15GEQ on.
3 Press one of the buttons in the FADER ASSIGN field to select the group of bands you
will control using the faders in the Channel Strip section.
For details on the bands corresponding to each button in the FADER ASSIGN field, refer to step
4 under “Using the 31BandGEQ”(p.619). When you press one of these buttons, the faders for
the bands selected on the touch screen will turn white, and the numbers of the corresponding
faders in the Channel Strip section will be displayed. Also, you will be able to use the faders in
the Channel Strip section to control the corresponding bands.
NOTE
The above operation is possible even if the Channel Strip section is locked. When you turn off the button in the FADER
ASSIGN field, the faders will return to the locked state.
623
GEQ/PEQ/Automixer > Using the Flex15GEQ