User Manual

Using the 8BandPEQ
1 Follow steps 1–8 under Inserting a GEQ/PEQ into a channel via the Selected
Channel section, insert the 8BandGEQ into a channel.
The system displays the p.626 that you inserted.
2 If you are using a stereo source, link two GEQ units.
When you press the GEQ LINK button, the following popup window will appear. To enable
linking, press any button other than CANCEL. The popup window contains the following items.
GEQ*A->GEQ*B button
The channel L parameter values will be copied to channel R, and then those parameters will
be linked. An asterisk (*) represents the GEQ location.
GEQ*B->GEQ*A button
The channel R parameter values will be copied to channel L, and then those parameters will
be linked. An asterisk (*) represents the GEQ location.
CANCEL button
Cancels the link and closes the popup window.
NOTE
The PEQ LINK button appears only for paired PEQs.
3 Press the PEQ ON/OFF button to turn the PEQ on.
625
GEQ/PEQ/Automixer > Using the 8BandPEQ