User Manual

GEQ/PEQ EDIT screen (8BandPEQ)
1
32
4
This screen contains the following items.
a
EQ type select button
Switches the EQ type to PRECISE, AGGRESSIVE, SMOOTH, or LEGACY.
b
PEQ graph
Displays the parameter values for the PEQ and filters.
c
PEQ LINK button
Press this button to access the PEQ LINK window, in which you can link the PEQ of paired channels.
d
FLAT button
Press this button to reset the GAIN parameters of all PEQ bands to 0 dB. All ON buttons for the notch filter will be
turned off. All parameter values other than those above will retain the same values, without being reset.
e
PEQ ON button
Switches the currently-selected PEQ on or off.
f
EQ button
Press this button to display the EQ graph.
g
RTA button
If this button is on, a semi-opaque frequency analysis graph of the input signal (immediately after EQ) will be
superimposed on top of the EQ frequency response graph.
h
HOLD button
If this button is on, the frequency response graph will indicate and hold the result of the frequency analysis.
626
GEQ/PEQ/Automixer > GEQ/PEQ EDIT screen (8BandPEQ)