User Manual

i
PEAK HOLD
If this button is on, the analyzed frequency response graph will hold the peak level indication.
j
BALLISTICS field
(
BALLISTICS button
If this button is on, you will be able to add rate of decay to the analyzed frequency response graph.
(
AST/SLOW switch button
Switches the decay rate of graph rendering (FAST/SLOW).
k
EQ IN/OUT level meters
Indicate the peak level of signals before and after the EQ. For a stereo channel, these meters indicate the level of both
the L and R channels.
l
LOW SHELVING ON/OFF button
Turn on this button to switch the LOW band to a shelving type filter.
m
HIGH SHELVING ON/OFF button
Turn on this button to switch the HIGH band to a shelving type filter.
n
BYPASS button
Enables you to bypass bands independently.
o
EQ parameter setting knobs
Indicate the Q, FREQUENCY, and GAIN parameters for BAND 1–8. Use the corresponding screen encoder or the
[TOUCH AND TURN] knob to adjust the parameters.
p
Notch filter Q knob
Adjusts the notch filter Q.
q
Notch filter frequency knob
Adjusts the notch filter frequency.
r
Notch ON button
Each of four notch filters features an ON button.
s
LIBRARY button
Press this button to open the PEQ library window.
t
DEFAULT button
Press this button to restore the default parameter setting.
u
COPY button
Copies the selected PEQ settings to buffer memory.
v
PASTE button
Press this button to paste the settings that were copied in buffer memory to the current PEQ. If valid data has not
been copied into buffer memory, you will be unable to paste it.
627
GEQ/PEQ/Automixer > GEQ/PEQ EDIT screen (8BandPEQ)