User Manual

Inserting Automixer into a channel
1 Press the RACK&REC button on the menu bar to access the RACK&REC screen.
This screen includes several pages, which you can switch between using the tabs located at
the top of the screen.
2 Press the GEQ RACK tab on the RACK&REC screen that displays GEQs.
The “GEQ RACK screen”(p.632) appears.
3 Press the GEQ MOUNT popup button.
NOTE
You can mount Automixer only to GEQ1.
The “GEQ MOUNT popup window”(p.633) appears.
4 In the GEQ MOUNT popup window, use the GEQ/PEQ/Automixer select buttons to
select the item you want to mount, and then press the OK button.
The “GEQ RACK screen”(p.634) appears.
5 Press the INPUT popup button.
6 In the INPUT PATCH popup window, select the input source and then press the x
button to close the window.
7 Press the OUTPUT popup button.
8 In the OUTPUT PATCH popup window, select the output destination and then press
the x button to close the window.
9 Repeat steps 5–8 to insert Automixer into the desired channels.
631
GEQ/PEQ/Automixer > Inserting Automixer into a channel