User Manual

b
Channel strip encoder
Adjusts the gain, pan, and the other parameters of the channel. You can assign five parameter functions (selected
from the following list) to this encoder, and use the [UP]/[DOWN] keys to select the function.
(
PAN/BALANCE
(
ANALOG GAIN
(
DIGITAL GAIN
(
AUTO A.G./D.G.
(
SELECTED SEND
(
MIX1 SEND - MIX72 SEND
(
MATRIX1 SEND -MATRIX36 SEND
(
HPF FREQUENCY
(
LPF FREQUENCY
(
DYNAMICS1 THRESHOLD
(
DYNAMICS2 THRESHOLD
(
DELAY
(
SILK TEXTURE
(
SURROUND L-R PAN
(
SURROUND F-R PAN
(
SURROUND DIV
(
SURROUND LFE
c
[Fn] key
Executes the function as assigned by the user. You can assign one of the following functions:
(
INPUT A/B
(
ISOLATE
(
ALTERNATE CUE
(
ENCODER PARAMETER
(
GC ON/OFF
(
SURROUND CUE
(
EQ A/B
(
DYNAMICS1 A/B
(
DYNAMICS2 A/B
(
VSC ON
d
[SEL] key
Enables you to select the channel that will be controlled in the Channel Strip section or on the display. When the
channel is selected, the key LED will light.
e
LED meter
Indicate the channel level.
f
Dynamics LEDs
Indicate the status of Dynamics 1 and 2.
64
Part Names & Functions (CS-R10, CS-R10-S, CSD-R7) > Channel Strip section (bay L, bay R, bay C)