User Manual

Using plug-ins
This section explains how to use plug-ins.
1 Press the RACK&REC button on the menu bar to access the RACK&REC screen.
2 Press the PLUG-IN RACK tab on the RACK&REC screen that displays plug-ins.
The “PLUG-IN RACK page of the RACK&REC screen”(p.645) appears.
3 Press the MOUNT popup button.
The “RACK MOUNT popup window”(p.646) appears.
NOTE
The RACK MOUNT popup window is displayed on only one of the bays.
4 In the RACK MOUNT popup window, use the PLUG-IN select buttons to select the
item you want to mount, and then press the OK button.
The “PLUG-IN ASSIGNMENT popup window”(p.647) appears.
5 Rotate the plug-in allocation knob to specify the location for the plug-in (indicated
in a pink frame).
6 Press the OK button to allocate the plug-in.
If you decide to cancel the operation, press the CANCEL button instead of the OK button.
The “Controlling the plug-in parameters”(p.649) appears.
7 Press the INPUT popup button.
8 In the INPUT PATCH popup window, select the input source and then press the x
button to close the window.
9 Press the OUTPUT popup button.
10 In the OUTPUT PATCH popup window, select the output source and then press the x
button to close the window.
644
Plug-ins > Using plug-ins