User Manual

RACK MOUNT popup window

3 4

This screen contains the following items.

Category select tabs

Enable you to select the category of plug-in that will be mounted in the rack.

BLANK button

Unmounts the plug-in from the rack.

NOTE

If you open this window by pressing the MOUNT button on the PLUG-IN RACK page, you will see this BLANK button and be able

to select a plug-in to unmount. However, if you press the BLANK button, a message will appear and you will be unable to

unmount the plug-in.

To unmount a specific plug-in, open the plug-in popup window for the corresponding RACK, and then press the MOUNT

button to display the RACK MOUNT popup window, in which you can select a plug-in to unmount.

PLUG-IN select buttons

Select the plug-in that will be mounted in the rack.

PLUG-IN DSP USAGE indication

Shows the state of plug-in resource usage.

646

Plug-ins > RACK MOUNT popup window