User Manual

g
[ON] key
Switches the channel on or off. If the channel is on, the key LED will light. In SENDS ON FADER mode, this key works
as an on/off switch for signals sent from each channel to the currently-selected MIX/MATRIX bus.
h
Channel name display
Indicates the channel name, fader level, etc.
i
Channel color indicator
Indicates the channel color. You can select the channel color from eleven options including OFF.
j
Fader
This is a touch-sensitive 100 mm motorized fader. In SENDS ON FADER mode, this fader adjusts the send level of the
signal sent from each channel to the currently-selected MIX/MATRIX bus.
k
SAFE R indicator
Lights up if the channel is set to Recall Safe.
l
SAFE M indicator
Lights if the channel is set to Mute Safe.
m
ISOLATE indicator
Lights if the channel is “Isolated.”
n
[CUE] key
Selects the channel for cue.
65
Part Names & Functions (CS-R10, CS-R10-S, CSD-R7) > Channel Strip section (bay L, bay R, bay C)