User Manual

h
PASTE button
Press this button to paste the settings that were copied in buffer memory to the current plug-in. If valid data
has not been copied into buffer memory, you will be unable to paste it.
i
COMPARE button
Press this button to switch between the current plug-in settings and data in buffer memory. If valid data has
not been copied into buffer memory, you will be unable to compare the data.
j
Parameter field
Shows the parameters of the currently-selected plug-in.
k
Screen encoder access field
Shows the name and value of the parameters that are assigned to the screen encoders. To switch the
parameters that are being controlled, press a tab within the screen.
l
BYPASS button
Bypasses plug-ins.
m
OUTPUT popup buttons (L/R)
Press these buttons to access the OUTPUT PATCH popup window, in which you can select a signal to patch to
the L/R channel.
n
IN/OUT meters
Indicate the level of the signal before and after it passes through the plug-in.
o
CUE A/B buttons
Turn on one of the buttons to audition the signal processed by the plug-in. You can choose CUE A, or CUE B.
^
p
ASSIST button
When you press this button, the screen shows the parameter assignments that can be operated by the screen
encoders.
NOTE
If the ASSIST button is on, you will be able to easily identify the parameters that are currently available for editing, and
the parameters that will be available for editing after you select them.
Rotate the screen encoder while holding it down to fine-tune the parameter value.
&
650
Plug-ins > Controlling the plug-in parameters