User Manual

e
MIX LOCK button
When this button is on, the mix balance will not change when the preset is changed. It will be disabled for other
operations such as the library recall except for switching between presets.
f
LED DISPLAY
Displays information for the selected program or parameters that are being modified.
g
BYPASS button
Bypasses the effect.
h
PROGRAM button
Switches between programs (algorithms).
i
KILL button
Shuts off the input (except when bypass is on).
j
Level meter
Displays the input/output level selected using the MONITOR button. The LIMIT LED indicator will light up if the level
exceeds 0 dB. Press the LIMIT LED to clear the LED that is lit. The LIMIT LED for the output side is also used for the
internal limit indicator of the reverb.
k
INPUT fader
Adjusts the input level.
l
OUTPUT fader
Adjusts the output level.
m
MIX fader
Adjusts the mix balance between dry and wet signals.
n
PREDELAY fader
Adjusts the amount of predelay.
o
DECAY fader
Adjusts the reverberation time. Use caution when LOW GAIN is set to boost (+), as lengthening the DECAY may cause
oscillation.
p
POSITION fader
Adjusts the front/rear listening position.
q
DIFFUSION fader
Adjusts the spread of the reverb.
r
LOW FREQ fader
Adjusts the frequency of the low-range EQ (shelving).
s
LOW GAIN fader
Adjusts the gain of the low-range EQ (shelving). Use caution with long DECAY settings, as boosting (+) the LOW GAIN
may cause oscillation.
656
Plug-ins > Controlling the SP2016 parameters