User Manual

e
Rolloff knob
Adjusts the LPF of the output part.
f
Rich button
When this button is on, the density of the reverb is increased.
g
High Diffusion button
When this button is on, the amount of reverb spread is increased.
h
VLF（Very Low Frequency） button
When this button is on, the reverb component of the ultra-low frequencies is increased.
i
Bandpass button
Turns on BPF in the output section.
j
Presence button
When this button is on, the tone becomes brighter.
k
Dry/Wet knob
Adjusts the mix of input signal and reverb signal.
l
Lock button
When this button is on, the Dry / Wet control is locked so that it cannot be changed.
m
Program button
For calling up the programs, which are divided into 5 program groups, containing 35 programs.
n
LED display
Shows the currently selected program. When a knob or button is operated, the corresponding parameters are
displayed.
o
Input meter
Indicates the input level.
p
Output meter
Indicates the output level.
666
Plug-ins > Controlling the Bricasti Design Y7 Stereo Reverb Processor plug-in parameters