User Manual

FILTER TYPE
(Low Shelf) (Bell) (Hi Shelf)
Main EQ Low Shelf Bell Hi Shelf
Sidechain filter LPF BPF HPF
e
FREQUENCY knob
Specifies the frequency that is controlled by the equalizer and the sidechain filter.
f
Q knob
Specifies the Q (steepness) of the equalizer and the sidechain filter. Turning the knob toward the right will
broaden the region affected by the equalizer and sidechain filter.
g
THRESHOLD knob
Specifies the threshold value at which the processing effect begins to apply.
h
RATIO knob
Specifies the ratio of boost/cut for the input signal. Turning this toward the right applies boost, and turning it
toward the left applies cut; turning the knob all the way in either direction produces the maximum effect.
i
ATTACK/RELEASE buttons
Enable you to select one of three settings for the attack time and release time at which compression or boost is
applied. FAST produces a fast attack and fast release, SLOW produces a fast attack and slow release, and AUTO
automatically adjusts the attack and release according to the frequency region.
j
MODE button
Specify whether processing operates when the sidechain signal exceeds the threshold value (ABOVE) or when it
falls below it (BELOW).
k
EQ GAIN meter
Indicates the gain of the dynamically changing EQ.
l
THRESHOLD meter
Indicates the level of the sidechain signal, referenced to the threshold level.
m
Graph display
Indicates the response of the equalizer. Normally this area shows the reference EQ graph, which indicates the
frequency and depth; and the dynamic EQ graph, which indicates the response of the dynamically changing
EQ. If SIDECHAIN CUE or SIDECHAIN LISTEN is on, this graph shows the response of the sidechain filter.
683
Plug-ins > Controlling the Dynamic EQ plug-in parameters