User Manual

Controlling the Portico 5045 plug-in parameters
This is a processor that accurately models the Portico 5045 Primary Source Enhancer made by Rupert Neve
Designs. Operation is extremely easy, allowing you to suppress background noise that enters the mic while
increasing clarity, enhancing the primary source and also improving the feedback margin. It is suitable not
only for a hand-held mic but also for a lavalier mic or headset mic, and can be used in a variety of situations
including event PA, concerts, or broadcast. This processor is also equipped with the audio transformer and
discrete amp circuit that are the signature of the Portico series, so that simply passing the signal through it
will increase the luster and depth of the sound.
a
PROCESS ENGAGE button
Turns the enhancement circuit on/off.
b
RMS/Peak button
Selects the operation mode for the level detector. You can select RMS mode or Peak mode.
c
TIME CONSTANT knob
Switches the attack time and release time. The settings are as follows.
RMS Mode Peak Mode
A: 50 ms
B: 100 ms
C: 200 ms
D: 750 ms
E: 1.5 s
F: 3 s
Attack: fixed at 20 ms
Release:
A: 20 ms
B: 200 ms
C: 1 s
D: 2 s
E: 5 s
F: 30 s
d
THRESHOLD knob
Adjusts the level at which enhancement begins. Signals below the THRESHOLD are attenuated.
e
PROCESS ACTIVE indicator
This indicator is lit when the input signal exceeds the THRESHOLD. Adjust the THRESHOLD so that this
indicator is lit when the primary audio source is being input, and unlit during periods of silence or between
phrases.
f
DEPTH knob
Adjusts the amount of attenuation for signals below the THRESHOLD.
693
Plug-ins > Controlling the Portico 5045 plug-in parameters