User Manual

Controlling the Comp276 plug-in parameters
Comp276 emulates the characteristics of a sought-after analog compressor commonly used in recording
studios. It produces a thick and solid sound that is suitable for drums or bass.
1 2 3
4 5 6 7
8 9
a
INPUT knob
Adjusts the input level.
b
RATIO knob
Adjusts the ratio of the compressor.
c
ATTACK knob
Adjusts the attack time of the compressor.
d
OUTPUT knob
Adjusts the output gain.
e
AUTO MAKEUP switch
If this switch is on, the decrease in the output gain when the compressor is applied will be compensated
automatically.
f
SIDECHAIN HPF switch
If this switch is on, the compressor applies less to the low-frequency region, strengthening the low-frequency
output.
g
RELEASE knob
Adjusts the release time of the compressor.
h
VU meters
Indicate the signal that is selected by the GR/-10/-20/OFF switches.
i
GR/-10/-20/OFF switches
Select the signal that is monitored by the VU meters.
GR: Indicates the amount of gain reduction.
-10: The signal with –10 dBu as 0 VU is shown.
-20: The signal with –20 dBu as 0 VU is shown.
OFF: The VU meter is off.
696
Plug-ins > Controlling the Comp276 plug-in parameters