User Manual

Controlling the DaNSe plug-in parameters
DaNSe is a dynamic noise suppressor with exceptional sound quality and operability, developed by K’s Lab
(Dr. K), of which Yamaha is a proud supporter. DaNSe features a revolutionary “learn” feature (LEARN), which
analyzes noise frequency characteristics and applies automatic settings to provide the optimum noise
suppression effect. The controls and graphics are designed in a way that’s easy to understand, making
settings quick through simple operations. DaNSe also allows for individually bands to be finely adjusted for
handling even difficult noises. Although DaNSe can be used with a variety of mics, it works particularly well
with mics intended for speech or lapel mics, suppressing fan noises such as from the air conditioning or
moving lights onstage. It is also quite effective in suppressing various noises in theater settings, bringing
greater clarity to the speaker’s voice.
8
3
4
5
7
6
1 2
a
LOW FREQUENCY knob
Adjusts the lower limit frequency band for suppressing noise. This cannot be set to a frequency 1/4 higher than the
HIGH FREQUENCY. As this uses a LEARN function to analyze the sound, you should adjust the frequency band before
learning.
b
HIGH FREQUENCY knob
Adjusts the upper limit frequency band for suppressing noise. This cannot be set to a frequency less than 4x higher
than the LOW FREQUENCY. As this uses a LEARN function to analyze the sound, you should adjust the frequency band
before learning.
704
Plug-ins > Controlling the DaNSe plug-in parameters