User Manual

LEARN button

Starts the LEARN function. When the LEARN function starts working, the input signal will be analyzed for 10 seconds,

and the THRESHOLD, GAIN 1–6 and internal signal processing parameters will automatically be adjusted to create the

optimum noise suppression effect for the usage environment. After LEARN ends, adjust the THRESHOLD and

TIGHTNESS a bit to your liking to achieve the sound quality that’s even closer to what you had in mind. Pressing the

LEARN button during learning or when closing the GUI will make the LEARN function stop.

Note: since the internal signal processing parameters as well are automatically adjusted, using LEARN in a different

environment even with the same parameters displayed set in the same way may have different results. If scene recall

or library recall are used during learning when Recall Safe is not on, the learning may fail.

REVERT

This reverts the parameters to their state just before using the LEARN function, if you have adjusted the parameters

manually. The button will be enabled after learning.

TIGHTNESS knob

Adjusts the release time. Turning the knob to the right produces a shorter release time.

THRESHOLD

Adjusts the THRESHOLD for all bands.

LINK knob

This adjusts GAIN 1–6 simultaneously, while keeping their positions relative to each other.

GAIN 1–6

Adjust the maximum gain reduction for BAND 1–6.

705

Plug-ins > Controlling the DaNSe plug-in parameters