User Manual

Controlling the OpenDeck plug-in parameters
OpenDeck emulates the tape compression created by two open reel tape recorders (a recording deck and a
reproduction deck). You can change the sound quality by adjusting various elements, such as the deck type,
tape quality, playback speed, etc.
1 6
7
8
9
) ! @
#
2
3
4
5
$
%
a
RECORD: DECK TYPE
Selects the recording deck type.
b
RECORD: LEVEL knob
Adjusts the input level of the recording deck. As you raise the level, tape compression is generated, which
narrows the dynamic range and distorts the sound.
c
RECORD: ADJUST HIGH knob
Adjusts the high range gain of the recording deck.
d
RECORD: BIAS knob
Adjusts the bias of the recording deck.
e
AUTO MAKE UP switch
If you turn this switch on, when you adjust the level of the recording deck (by using the RECORD/REC LVL knob,
the level of the reproduction deck (the REPRODUCE/REPR LVL] knob) will also change, maintaining the relative
output level. You can change the amount of distortion without changing the output level.
f
REPRODUCE: DECK TYPE
Selects the reproduction deck type.
706
Plug-ins > Controlling the OpenDeck plug-in parameters